Samsung NP-X22A002/SEI, NP-X22A003/SEG, NP-X22T001/SEG manual How to Set up the Sharing Client

6 Set up the device to be connected to the client as shown in the figure below and click Next.

	Because the wireless connection name and network
	key entered in the sharing server must be entered in
Note	the client as well, remember them.

7 Check the settings and click Next.

8 Click Add Printer and set up a printer following the instructions in the wizard.

Once printer addition is complete, click Refresh. Select the added printer and click Complete.

If you don’t want to add a printer, just click Complete without following the instructions in the

Note wizard.

9 If the “Do you want to move to newly added location now?” window appears, click No. The added location icon is created and sharing server setup is complete. Set up the sharing client next.

When you use Internet Connection Sharing, you have to change the McAfee Firewall settings.

p.164

How to Set up the Sharing Client

This description is discussed based on the wireless connection to the sharing server. The sharing server has to be turned on and the wireless LANs in both computers have to be active.

1 Run Samsung Network Manager on a computer that will function as the sharing client.

2 Click Add.

3 Select the icon that shows the network location and enter the location name. Click Next.

4 Select Sharing Client (Wireless) and click Next.

5 Enter the values in the Wireless Connection Name and Network Key fields in the Select Device window and click Next.

6 Check the settings and click Next.

90