Samsung NP270E5EK01US manual Using the TPM Security Device Optional, Installing the TPM program

This program is only provided for models with Recovery and the TPM function.

Using the TPM Security Device (Optional)

Chapter 3. 70

Using the computer

When the system reboots, press the corresponding key(s) by
5 following the onscreen instructions.	Installing the TPM program
	You can install the TPM program as follows.

	When the computer restarts automatically and the Samsung
6 logo screen appears, press the F2 key repeatedly.
7	Select the Security > TPM Configuration > Change TPM
	Status item and set the item to Enable and Activate.
			Aptio Setup Utility
					Security
			TPM Configuration
		TPM Support		[Enabled]
		Change TPM Status		[	No Change	]
		Security Chip State			Disabled and Deactivated
					No Change
					Clear
					Enable and Activate
					Disable and Deactivate
8 Press the F10 key to save the changes.
	When the system reboots, press the corresponding key(s) by
9 following the onscreen instructions.

10Press the F10 key to save the changes. The computer automatically restarts. Initialization of the TPM chip has been completed. Now, install the TPM program and register the TPM program.

	Turn the computer on and immediately press the F4 key
1 several times.
2	After a moment, the Recovery program runs.
3	Click System Software.
	When a pop-up window appears to ask you to reboot
4 the system, click Yes. The system starts to reboot. After a
	moment, the SW Update program automatically runs.
5	Connect to the network.
6	Select TPM Host SW and click Install.