Samsung NP915S3GK02US Using the WOL Wake On LAN function, Configure the IP settings, IP address

Wired Network

6 Configure the IP settings.

When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually.

	When not using DHCP, ask your network administrator for the
	IP address.
7	When you have completed the settings, click the OK button.
	The network settings have been completed.

Chapter 3. 73

Using the computer

Using the WOL (Wake On LAN) function

<Wake On LAN> is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN).

1	Click Charms menu on the Desktop > Settings	>
	Control Panel > Network and Internet > Network and
	Sharing Center and click on Change adapter settings in
	the left menu pane.
2	Right-click on the Wired Ethernet Connection and select
	Properties.

3 Click Configure > Power Management tab. Select Allow this device to wake the computer, then click OK. Restart the system.

-If the system wakes up from Sleep mode even though there is no received signal, use the system after disabling the <Wake On LAN> function.

-Connecting a wired LAN while using a wireless LAN may not activate the <Wake On LAN> function. Set the Wireless LAN to Disable to use the <Wake On LAN> function.

-<Wake On LAN> feature may not work while using Hybrid power saving feature. Hybrid sleep mode can be disabled from Power Options under Control Panel.