Samsung NP905S3GK02US Using the TPM Security Device Optional, Installing the TPM program

Using the TPM Security Device (Optional)

Chapter 3. 80

Using the computer

5

6

When the system reboots, press the corresponding key(s) by following the onscreen instructions.

When the computer restarts automatically and the Samsung logo screen appears, press the F2 key repeatedly.

Installing the TPM program

You can install the TPM program as follows. Install the program according to the procedures below.

7	Select the Security > TPM Configuration > Change TPM
	Status item and set the item to Enable and Activate.

This program is only provided for models with Recovery and the TPM function.

TPM Device	Enabled
TPM State	Clear
Security Chip State	Enabled & Activate
	Clear
	Enabled & Activate
	Deactivate & Disable

Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.

8 Press the F10 key to save the changes.

9 When the system reboots, press the corresponding key(s) by following the onscreen instructions.

10Press the F10 key to save the changes. The computer automatically restarts. Initialization of the TPM chip has been completed. Now, install the TPM program and register the TPM program.

1

2

3

4

5

6

7

Turn the computer on and immediately press the F4 key several times.

After a moment, the Recovery program runs.

Click System Software.

When a pop-up window appears to ask you to reboot the system, click Yes.

The system starts to reboot. After a moment, the SW Update program automatically runs.

Connect to the network.

Select TPM Host SW and click Install.

After the program is completely installed, click Close.

Close the SW Update window and reboot your computer again.