Connecting to a Power Source
ŝ14Ş
You can charge the rechargeable battery (SLB-0837(B)) by using an SAC-46
KIT. The SAC-46 KIT consists of the AC adapter (SAC-46) and the USB
cable (SUC-C2). When the AC adapter and the USB cable are assembled, it
can be used as an AC cable.
ƃUsing the SAC-46 as an AC charger
: Insert the AC adapter into the USB connector.
When the AC adapter is inserted, it can be
used as an AC charger.
ƃUsing the SAC-46 as an USB cable
: Remove the AC adapter from the USB
connector. You can transmit data with a PC
(p.88) or charge the battery.
In the following cases, the battery may not be charged.
ƃWhen using the USB cable that was not supplied with this camera. Use
the supplied USB cable.
ƃWhen using a USB hub. Connect the camera to the PC directly.
ƃWhen other USB devices are connected to the PC. Disconnect the
other USB devices.
ƃWhen the USB is connected to the USB port located on the front of the
computer. Use the USB located on the back of the computer.
ƃIf the USB port of the PC doesn't meet the Power output standard (5V,
500mA), the camera may not be charged.