Self-timer / Remote control Voice recording / Voice memo

ŝ40Ş

ƈRemote control range

When you take a picture by using the remote control,
refer to the illustrations shown alongside
about the remote control range.
[Shutter button on the
remote control]

A voice can be recorded for as long as the available recording time(Max 10

hours) of the memory capacity allows. And you can add your voice-over to a

stored still image.

ƈVoice recording

1. Select a recording mode with the exception
of the Movie clip mode by rotating the mode dial.
2. Select the Voice recording menu by using
the smart button.
3. Press the shutter button to record a voice.
- Press the shutter button once and voice is
recorded for as long as the available
recording time allows (Max 10 hours).
The recording time will be displayed on the LCD
monitor. Voice will still be recorded if the shutter
button is released.
- If you wish to stop recording, press the shutter
button again.
- File type : *.wav
RECORD
MEMO
OFF
RECORD
MEMO
OFF
ƃ
When taking a picture using the self-timer, the self-timer lamp works as follows :
2 second self-timer setting : The self-timer lamp blinks at 0.25 second
interval for 2 seconds.
10 second self-timer setting : The self-timer lamp blinks at 1 second
interval for the first 7 seconds. It blinks at
0.25 second interval for the remaining 3
seconds.
ƃIf you operate the Back button during the self-timer operation, the self-
timer function is canceled.
ƃUse a tripod to prevent camera shake.

ƈReplacing battery for the remote control

Make sure the + (positive) polarity is toward the top and the - (negative) polarity is
toward the bottom while installing battery for the remote control. Replace battery
for the remote control in the local service centre. Use the CR 2025 3V battery.