Samsung NX100 Sensor Cleaning Remove dust from the sensor, Device such as a monitor or TV

Camera settings menu

Setting 3

Learn about the menu items of the Setting 3.

To set Setting 3	In Shooting mode, press [m] ► \ ► an option.
options,

		* Default
Item	Description
	•	Sensor Cleaning: Remove dust from the sensor.
	•	Start-Up Action: When on, the camera performs
		sensor cleaning each time you turn it on. (Off*, On)
Sensor		As this product uses interchangeable lenses, the
		sensor can get dust on it when you change lenses.
Cleaning
		This can lead to dust particles appearing in the photos
		you take. It is recommended not to change lenses
		when you are in a particularly dusty area. Also, make
		sure to attach the lens cap to the lens when not using
		it.
	Select the video output signal appropriate for your
	country when connecting the camera to an external video
	device such as a monitor or TV.
Video Out	•	NTSC*: US, Canada, Japan, Korea, Taiwan, Mexico
	•	PAL (Supports only PAL B, D, G, H, or I):Australia,
		Austria, Belgium, China, Holland, Finland, Germany,
		England, Italy, Kuwait, Malaysia, New Zealand,
		Singapore, Spain, Sweden, Switzerland, Thailand,
		Norway

		* Default
Item	Description
	When you connect the camera to an HDTV that supports
	Anynet+ (HDMI-CEC), you can control the play function of
Anynet+	the camera with the TV remote control.
	•	Off: You cannot control the play function of camera
(HDMI-CEC)
		with the TV remote control.
	•	On*: You can control the play function of camera with
		the TV remote control.

When you connect the camera to an HDTV with an HDMI cable, you can change the resolution of the image.

•NTSC: Auto*, 1080i, 720p, 480p

•PAL: Auto*, 1080i, 720p, 576p

HDMI Size

If the connected HDTV does not support the resolution you select, the camera sets the resolution one level lower.

95