Samsung P10 Disc Playback, Press OPEN, Load a disc, To stop playback, press STOP during playback

1p~30p(P10)-GB 2/1/05 10:44 AM Page 20

Disc Playback

Press OPEN/

1 CLOSE button to open the disc tray.

2 Load a disc.

•Place a disc gently into the tray with the disc’s label facing up.

Press OPEN/

3 CLOSE button to close the disc tray.

DVD VCD CD

•Playback starts automatically.

Note

•Depending on the content of the disc, the initial screen may appear different.

To stop playback, press STOP during playback.

•

•

If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory.

If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)

If pressed twice, “STOP” is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.

To temporarily pause playback, press PLAY/PAUSE during playback.

•To resume playback, press PLAY/PAUSE ( ) button again.

Selecting the Video Format

Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.

•By default, the video format is set to "PAL".

•"NTSC" or "PAL" will appear in the display.

At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".

•Each country has a different video format standard.

•For normal playback, the video format of the disc must be the same as the video format of your TV.

17