Samsung P10 Setting the Password, and then press, ENTER button, Press Cursor button to

31P~60P(P10)-GB 2/1/05 10:45 AM Page 37

Setting the Password

GB

You can set the password for the Parental (rating level) setting.

Press Cursor

1 Press MENU button. 2 button to move to ‘Setup’ and then

press ENTER button.

	Press Cursor button to	4	Press ENTER			Enter the password
	move to ‘PASSWORD’
3 and then press ENTER			button.	5 and then press
	button.				ENTER button.
				• Enter the old password, a new
					password, and confirm new password.
				• The setting is complete.			SETUP

Note • The password is set to "7890" by default.

If you have forgotten the rating level password, do the following:

• While “NO DISC” message appears on the display of main unit, hold the main unit's button for longer than 5

seconds. “INITIALIZE” appears on the display and all settings will return to the default values.

•Press the POWER button.

Using the RESET function will erase all stored settings.

Do not use this unless necessary.

36