CPU RAM Ethernet OS Application
Recommended P3.0 GHz 512 M 100 M / 1
GWindows
XP WMP 9 or lat-
er
PowerSaver
This PDP Display has a built-in power management system called PowerSaver. This system saves
energy by switching your PDP Display to low-power mode when it has not been used for a certain
amount of time. The PDP Display automatically returns to normal operation when you press a key on
the keyboard. For energy conservation, turn your PDP Display OFF when it is not needed, or when
leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant
video card installed in your computer. Use the software utility installed on your computer to set up this
feature.
PowerSaver (When used as a Network PDP Display)
State Normal Opera-
tion Power saving
mode Power off
EPA/ENERGY
2000
Power Indicator Green Green, Blinking Amber
Power Consump-
tion P42H(N) 460 W Less than2 watts 1 watts
P50H(N) 560 W
PowerSaver (When used as a normal PDP Display)
State Normal Opera-
tion Power saving
mode Power off
EPA/ENERGY
2000
Power Indicator Green Green, Blinking Amber
Power Consump-
tion P42H(N) 380 W Less than2 watts 1 watts
P50H(N) 480 W
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjusts the screen as follows.
Display Mode Horizontal
Frequency
(kHz)
Vertical Fre-
quency (Hz) Pixel Clock
(MHz) Sync Polarity
(H/V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.469 59.940 25.175 -/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
Specifications
84