Connections
Connecting a Computer
Using a Power cord with Earth
•In the event of failure, the earth lead may cause electric shock. Make sure to
wire the earth lead in correctly, before connecting the AC power. When un-
wiring the earth lead, make sure to disconnect the AC power in advance.
Note
AV input devices such as DVD players, VCR's or camcorders as well as your computer can be con-
nected to the PDP Display. For detailed information on connecting AV input devices, refer to the
contents under Adjusting Your PDP Display.
Connect the power cord for your PDP Display to the power port on the back of
the PDP Display. Trun on the power switch.
There are 2 ways to connect the D-sub to your PDP Display. Choose one of the
following:
Using the D-sub (Analog) connector on the video card.
•Connect the D-sub to the 15-pin, RGB port on the back of your PDP Display
and the 15 pin D-sub Port on the computer.
Using the DVI (Digital) connector on the video card.
•Connect the DVI Cable to the DVI(HDCP) port on the back of your PDP
Display and the DVI port on the computer.
Connect the audio cable for your PDP Display to the audio port on the back of
your computer.
29