Maintaining the Washing Machine

Draining the washing machine in an emergency

1.Unplug the washing machine

from the power supply.

2.Remove the base cover by using

a screw driver to pry it off.

3. Unscrew the emergency drain cap by turning left. Grip the cap on the end of the emergency drain tube and slowly pull it out about 20 cm.

4.Allow all the water to flow into a bowl.

5.Reinsert the drain tube and screw the cap back on.

6.Replace the base cover.

If the temperature drops below freezing and your washing machine is frozen:

1.Unplug the washing machine.

2.Pour warm water on the source faucet to loosen the water supply hose.

3.Remove the water supply hose and soak it in warm water.

4.Pour warm water into the washing machine drum and let it sit for 10 minutes.

5.Reconnect the water supply hose to the water faucet and check if the water supply and drain operations are normal.

1.Wipe the washing machine surfaces, including the control panel, with a soft cloth and non-abrasive household detergents.

2.Use a soft cloth to dry the surfaces.

3.Do not pour water on the washing machine.

1.Press the release lever on the inside

of the detergent drawer and pull it out.

2.Remove the cap from compartment .

3.Remove the liquid detergent divider from compartment .

4.Wash all of the parts under running water.

5.Clean the drawer recess with an old toothbrush.

6.Reinsert the cap (Pushing it firmly into place) and replace the liquid detergent divider into the drawer.

7.Push the drawer back into place.

8.Run a rinse program without any laundry in the drum.

14 SAMSUNG Washing Machine Owner’s Instructions