Quick Setup Guide
Step 4: Connect External Devices
Connecting an audio device (Home Theater, etc.)
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
STOP | ||
Samsung Electronics America, Inc. | ||
Please do not return this unit. | 105 Challenger Road Ridgefield Park, NJ | |
Samsung Electronics Canada Inc. | ||
If you have problems operating your | 55 Standish Court Mississauga, Ontario L5R 4B2 | |
TV, call: | Call Center hours of operation: | |
AM EST. | ||
To register this product, visit: www.samsung.com/ | ||
For web support please visit: | ||
register. | ||
www.samsung.com/support | ||
|
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)
Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality.
✎✎When connecting to AV IN on the back of your TV, attach the video cable (yellow) to the green jack next to the AV IN label. The jack will not match the color of the video cable (yellow).
HDMI Cable (Not Supplied)
Best Connection
HD connection (up to 720p/1080i)
Using an HDMI Cable
DVD /
HD STB
Connect your TV to your Home Theater or other audio device to enjoy enhanced Sound quality.
Analog Audio connection
Using an Audio Cable
Amplifier / DVD home theater
Audio Cable (Not Supplied)
AUDIO IN
Digital Audio connection
Step 1
HDMI OUTDevice
Using an Optical Cable
: Install the Stand
Optical Cable (Not Supplied)
Digital Audio System
Follow the steps below to connect the TV to the stand.
✎✎NOTE
xx Make sure you distinguish between the front and back of the Stand and Guide Stand when assembling them.
xx Make sure that at least two people lift and move the TV.
xx Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to one side.
| Screws (M4 X L12) | Top view | |
|
| ||
| Guide Stand |
| |
1 Connect the Guide Stand to the |
|
| Front |
Stand |
|
| |
Stand using four screws (M4 X L12) |
| Rear | |
as shown. |
|
| |
| Rear |
| |
|
|
| |
2 With your TV upright, connect the 3 Fasten screws (M4 X L12) at | |||
TV to the Stand as shown. |
| position 1, and then fasten the | |
|
| two screws (M4 X L12) at position | |
|
| 2. |
|
s |
|
| s |
s |
|
| |
Video Cable
(Not Supplied)
Lowest Quality Connection
Audio/Video connection (480i only)
Using an Audio/Video Cable
Digital Audio System, Amplifier, Home Theater |
| Audio Cable | |||
| (Not Supplied) | ||||
|
| ||||
Device | VIDEO OUT |
| AUDIO OUT |
|
|
|
|
| |||
3 | HDMI to DVI Cable | Very Good Connection | |
IN | (Not Supplied) |
|
|
HDMI |
| HD connection (up to 720p/1080i) | |
|
| ||
|
| Using a DVI to HDMI Cable | |
|
| DVI OUT | DVD / |
|
|
| HD STB |
|
| AUDIO OUT | Device |
Audio Cable (Not Supplied)
Good Connection
Component connection (up to 720p/1080i)
Using a Component Cable
COMPONENT OUT Digital Audio System, Amplifier,
Home Theater
Component Cable |
|
(Not Supplied) | Device |
|
AUDIO OUT
OPTICAL
Connecting a PC
Connect your TV to a PC to use it as a Monitor.
|
|
| HD connection |
Audio Cable (Not Supplied) |
| Using a DVI to HDMI Cable | |
|
|
| AUDIO OUT |
|
|
| DVI OUT |
HDMI to DVI Cable (Not Supplied)
Using an
PC OUT
Audio Cable (Not Supplied)
AUDIO OUT
s |
|
|
s | s | s |
| ||
|
| s |
Front
2 |
Rear | 1 |
Step 2: Install the Batteries into the Remote
Step 5: Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug & Play function. With Plug & Play, you can select the On Screen Display language, set the clock mode, and launch the TV’s channel memorizing process.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow buttons on your remote. To make a selection, press the ENTEREbutton.
✎✎Most cable systems are Standard(STD) systems, If you are not sure about what kind of cable system you have, contact your cable company.
✎✎If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4, according to the directions for your cable or satellite box.
7Select the time zone in which you live, and then press ENTEREbutton.
8After the time zone screen, The connection method for best HD screen quality is displayed. Press Right arrow button on your remote to view each screen in succession. Press the Blue button to skip this section.
To install batteries into your remote control, follow these steps:
1. | Lift the cover on the back of the remote |
| upward as shown in the figure to the |
| right. |
2. | Install two AAA batteries. |
| ✎✎ Make sure to match the + and - |
To skip a screen, press the MENU button. To turn on your TV, press the POWER button on the remote or on the TV. To run Plug & Play, follow these steps:
1 Using your remote control, |
| Plug & Play |
|
|
Select Language of the OSD. |
|
| ||
select the language for the On | English |
| ||
|
|
| ||
Screen Display (OSD), and then | Language | : | Español |
|
press ENTEREbutton. |
|
| Français |
|
|
|
| UMove | EEnter |
4The TV memorizes the available channels. This process can take up to 45 minutes.
Plug & Play
| Auto Program in Progress. |
|
| |
| DTV Air : | Air : |
|
|
| DTV Cable : | Cable : | Cable : 35 | |
|
|
|
| 48% |
|
|
|
| |
|
|
|
|
|
Stop
EEnter mSkip
9The Enjoy your TV. screen appears. Then press ENTEREbutton.
If You Want to Rerun Plug & Play
1. | Press the SOURCE button on your remote, then select TV mode. |
2. | Press the MENU button on your remote to display the menu. |
3. | Press the ▲ or ▼ button to select Setup, and then press ENTEREbutton. |
4. | Press ENTEREagain to select Plug & Play. |
ends of the batteries to the diagram in the battery compartment. |
3. Replace the cover. |
Step 3: Connect Power and Antenna or Cable
VHF/UHF Antenna
Antenna Cable |
| Connect Ant In to | ||
|
| |||
(Not Supplied) |
|
| • | Wall cable jack |
|
|
| ||
|
|
| • VHF/UHF Antenna | |
or | • | Cable or Satellite box | ||
|
|
| ||
Ant or Cable Out
2Select Home Use, and then press ENTEREbutton. If you select Store Demo, the TV will reset your picture and audio settings every 30 minutes.
3 Antenna Source is Air, Cable |
or Auto, you must select |
Plug & Play
Select ‘Home Use’ when installing this TV in your home.
Store Demo | Home Use |
|
|
| LMove EEnter |
|
|
| Plug & Play |
Select the Antenna source to memorize. | |
5After the TV has memorized the channels, choose the Clock Mode. Select Auto if you have a digital channel in your area. Select Manual if you don’t, or if you have a cable or satellite box. When done, press ENTEREbutton.
✎✎If you select Manual, the clock setting screen appears.
Plug & Play |
|
|
Set the Clock Mode. |
|
|
Clock Mode | Auto |
|
Manual |
| |
|
| |
UMove | EEnter | mSkip |
Use a 75 ohm (round) cable.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
Antenna Source to same type |
as your cable system type. After |
selecting source, select Start; |
then press the ENTERE |
button on your remote. |
Air | Start |
Cable | Start |
Auto | Start |
|
|
UMove | EEnter mSkip |
| 6 Select the daylight savings time | Plug & Play |
|
| |
|
|
| ||
| setting: Off, On or Auto and | Set to daylight saving time. | Off |
| |
| then press ENTEREbutton. |
|
| ||
DST | On |
| ||
| ✎✎This function is only available |
| |||
|
| |||
| Auto |
| ||
| when the Clock Mode is set to | UMove | EEnter | mSkip | |
| Auto. | ||||
|
|
|
