Lucent Technologies 555-661-140 manual Backing Up System Programming

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Upgrading the System	Page 9-4
Backing Up System Programming

NOTE:

When upgrading from a networked Release 6.0 system, the non-local dial plan extension ranges must be manually programmed to suit the customer’s configuration.

Backing Up System Programming

NOTE:

You cannot upgrade system programming for the MERLIN II Communications System; it must be reprogrammed. To upgrade a MERLIN II Communications System, see “Upgrading from the MERLIN II Communications System,” later in this chapter.

Use the following procedure to back up programming from Release 6.1 or earlier:

! Install SPM.

! Back up system programming.

See the Backup command in System Programming and Maintenance (SPM).

■To back up system programming from Release 1.0 or 1.1, you can use any version of SPM (1.16 is recommended).

■To back up system programming from Release 2.0, you must use SPM version 2.09 or higher.

■To back up system programming from Release 2.1, you must use SPM version 2.16 or higher.

■To back up system programming from Release 3.0 or 3.1, you must use SPM version 3.18 or higher.

■To back up system programming from Release 4.0, you must use SPM version 4.15 or higher.

■To back up system programming from Release 4.0, 4.1, or 4.2, you must use SPM version 4.25 or higher.