Lucent Technologies 555-661-140 manual  Install the Release 4.0 processor module in the carrier

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Upgrading the System	Page 9-19
Upgrading from the MERLIN II Communications System

! Replace old modules and add new modules as specified on the Control Unit Diagram of Form 1, System Planning.

See “Installing the Control Unit” in Chapter 2 if you need instructions.

! Install the Release 4.0 processor module in the carrier.

See “Installing the Processor” in Chapter 2.

! Perform a frigid start (System Erase) to ensure that system programming is returned to default values.

Use 6\VWHP￿(UDVH from the SPM Maintenance menu:

0DLQWHQDQFH→6ORW→00→'HPDQG￿7HVW→6\VWHP￿(UDVH (Line 5, left button) twice→<HV

See Maintenance and Troubleshooting for more information on System

Erase.

! Program the system.

■Restore the system programming from a system programming disk or Translation Memory Card (Release 3.0 and later only), if available.

See “Restoring from the System Programming Disk” or “Restoring from the Translation Memory Card,” in Chapter 7.

■If a disk or memory card is not available, see System Programming for details on programming the system.

! If applicable, program new features.

See System Programming for detailed programming procedures.