Lucent Technologies 555-661-140 manual Installing the PC, CAT, or Printer

Models: 555-661-140

1 355
Download 355 pages 10 Kb
Page 198
Image 198

MERLIN LEGEND Communications System Release 6.1

Issue 1

Issue 1

Installation 555-661-140

August 1998August 1998

Installing the PC, CAT, or Printer

 

 

 

Connecting a PC to the Control Unit

Page 5-1

 

 

 

 

 

 

Installing the PC, CAT, or Printer

5

 

 

 

 

 

 

Once you complete the installation procedures presented in the previous chapters, you can connect a Station Message Detail Recording (SMDR) or Call Accounting Terminal (CAT) printer and a personal computer (PC), or a CAT and CAT printer, to the system.

Connecting a PC to the Control Unit

You can use a PC with MS-DOS 3.3 or higher and SPM 4.15 for SMDR, system programming, or maintenance. The method you use to connect the PC to the control unit depends on the distance between the hardware:

If the PC is within 50 ft. (15.2 m) of the control unit, see “Connecting a PC Within 50 Feet” on the following page.

If the PC is more than 50 ft. (15.2 m) from the control unit, see “Connecting a PC More Than 50 Feet Away” later on this chapter.

! CAUTION:

To prevent damage from electrostatic discharge (ESD), avoid touching leads, connectors, pins, and other components. Use a properly grounded wrist strap.

Page 198
Image 198
Lucent Technologies 555-661-140 manual Installing the PC, CAT, or Printer, Connecting a PC to the Control Unit