Lucent Technologies 555-661-140 manual Wiring a Telephone for Two Voice Pairs

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Installing Telephones and Adjuncts	Page 3-61
Connecting Telephones to the Control Unit

Wiring a Telephone for Two Voice Pairs

If an analog telephone requires either the Voice Announce to Busy feature or voice and data operating independently, use a bridging adapter to assign two adjacent odd/even telephone jacks (for example, 01 and 02, 13 and 14) on an analog telephone module to that telephone. This provides the telephone with the two voice pairs needed to use these features. See Figure 3-39 on page 3-62.

NOTE:

The numbers of these telephone jacks are boxed on the system forms. In Figure 3-39 on page 3-62, the label on the bridging adapter refers to the default dial plan extension number, not the telephone port number.

The even jack on the bridging adapter should be connected to the odd-numbered telephone port, and the odd jack on the bridging adapter should be connected to the even-numbered telephone port.