Lucent Technologies 555-661-140 manual Testing the Paging System, Testing Music On Hold

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Initializing and Testing the System	Page 7-18
Testing the System

! At the test telephone, pick up the handset.

! Dial the access code and the number associated with the dictation equipment.

! Verify that the ready tone is transmitted.

! Test the transmission in both directions; make a recording and play it back.

! Hang up.

Testing the Paging System

To test the paging system, follow the steps below:

! Pick up the handset at the test telephone and dial the number for a particular zone.

If ZoneMate 9 paging equipment is in use with PagePac 20, get an acknowledgment tone first and then dial the zone code to make an announcement. You may hear a confirmation tone.

! Make an announcement into the handset.

You should hear the announcement over the loudspeaker(s).

! Hang up.

! Repeat Steps 1 through 3 for all paging zones.

Testing Music On Hold

To verify that music is provided to outside callers placed on hold, follow the steps below. Inside callers do not hear Music On Hold.

! Pick up the handset at the test telephone.

! Dial the central office trunk access code and the system’s published directory number; or, if you are using a DID trunk, dial any extension.