Lucent Technologies 555-661-140 manual Security Alert

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Installing Applications	Page 8-18
Lucent Technologies Attendant

! Security Alert:

Products that are connected through a voice port must be properly restricted to prevent toll fraud. See Appendix A in Maintenance and Troubleshooting for more information.

Considerations

You cannot connect Lucent Technologies Attendant† to a system that operates in Behind Switch mode.

You cannot connect Lucent Technologies Attendant† to a system that has an AUDIX application or a voice mail system installed.

You can connect a maximum of four Attendants to the system.

You should program all lines to Lucent Technologies Attendant† for reliable far-end disconnect.

The system may need more touch-tone receivers if:

■Single-line telephone users do not get a dial tone

■Lucent Technologies Attendant† fails to transfer calls

■Calls fail to ring or go to coverage prematurely

When Attendant is set up for both daytime and after-hours operation, the time on each Attendant’s clock must match the system clock so that the system recognizes the end of the business day.

Hardware Requirements

Lucent Technologies Attendant† requires connection to an 012 or 016 (T/R) basic telephone module. You can use up to eight jacks on an 012 basic telephone module or up to 16 jacks on an 016 (T/R) basic telephone module for Lucent Technologies Attendants†.