Lucent Technologies 555-661-140 manual Ground-Start Button

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Initializing and Testing the System	Page 7-20
Testing the System

Ground-Start Button

Figure 7-1. Ground-Start Button

To test PFT jacks, follow the steps below:

! Plug a touch-tone or rotary dial telephone into a PFT jack.

! Note the outside line number assigned to the lowest line/trunk jack on the module and be sure that the outside trunk is connected to the system.

! Turn off power to the control unit.

Follow the procedure in “Powering Down the System” in Chapter 9.

! If the telephone is connected to a GS trunk, push the GS button attached to the telephone.

! Pick up the handset on the touch-tone or rotary dial telephone. You should hear a dial tone.

! If the telephone is connected to a GS trunk, push the GS button attached to the telephone again.

! Dial an outside number—make sure someone can answer the call.