Lucent Technologies 555-661-140 Terminal Adapter and CSU Settings, Terminal Adapter Settings

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Connecting Data Equipment	Page 6-21
Video Conferencing Data Stations

c.Use the DB-37 cables to connect the EIA-232/V.35 converters to the video codec’s V.35 communication ports. See the documentation packaged with the video codec for instructions.

! If it is not already connected, connect the CSU to the 100D module on the control unit and to the 5ESS or 4ESS exchange switch.

See “Installing the Channel Service Unit” in Chapter 4.

! When you are ready to power up the system, plug the power supplies, CSU, video conferencing equipment, and control unit into the AC outlets.

Terminal Adapter and CSU Settings

You need to set the terminal adapter and the CSU as indicated in Table 6–2. If the customer’s system is running at 56 kbps, set the CSU line-coding DIP switches according to the instructions in “Setting the CSU DIP Switches” in Chapter 4.

Table 6-2. Terminal Adapter Settings

Settings	56 Kbps	64 Kbps
Auto-dial	Off	Off
Busy out	Off	Off
Datarest	On	Off
DTR	Follow	Follow
Duplex	Full	Full
Mode	Cs	Cs

Speed 56,000 64,000