Lucent Technologies 555-661-140 manual RJ11 and RJ14 Interfaces

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Connecting the Control Unit to the Network Interface	Page 4-11
Wiring

Single-Line Adapter (RJ11)

2-Line Adapter (RJ14)

(267C)

Figure 4-5. RJ11 and RJ14 Interfaces

! CAUTION:

Incorrect wiring can damage the ports and cause them to stop functioning. Make sure you use the proper cords. For all GS/LS modules, do the following:

■Use a D2R cable from an RJ11.

■Do not use the Brand-Rex Quad cable from an E66 block.

■If you cannot avoid using the Brand-Rex Quad cable, reverse the tip and ring leads at the E66 block to correct the mismatch.

To connect the RJ11 and RJ14 network interfaces to the control unit, follow the steps below: