Lucent Technologies 555-661-140 manual Connecting a Printer Within 50 ft .2 m

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Installing the PC, CAT, or Printer	Page 5-16
Connecting a Printer to the Control Unit

SMDR

Jack

Z200A

EMI

Filter

355AF

Adapter

Processor Module

Control Unit

EIA-232-D

SMDR Printer

Figure 5-5. Connecting a Printer Within 50 ft. (15.2 m)

To connect a printer within 50 ft. (15.2 m), follow the steps below. Refer to Figure 5–5.

! Plug the short end of a Z200A EMI cord into the SMDR jack on the control unit.

! Plug the other end of the Z200A EMI cord into a 355AF or 355A adapter.

! Plug the female end of the adapter into either the 25-pin male connector on the printer’s interface cable or the serial port on the printer.

! Set the appropriate printer options for SMDR.

See “Setting Printer Options and DIP Switches”on page 5-21 for instructions.