Lucent Technologies 555-661-140 manual Replacing a Module in the Carrier

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Upgrading the System	Page 9-13
Upgrading the Control Unit

1

3

2

Figure 9-4. Replacing a Module in the Carrier

! Remove the clips from the left side of the control unit as you did in Step 1; however, make sure you replace the clips before securing the screws again.

! Reinstall the power supply module by hooking it onto the rod at the top of the carrier and then swinging it down into place. See Figure 9–4.

! Push the power supply module firmly until you hear it lock.