Lucent Technologies 555-661-140 manual Adjusting or Removing the Deskstand

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Installing Telephones and Adjuncts	Page 3-49
Assembling MLX Telephones

Pull Up and Away

Press

Center Tab

Figure 3-30. Adjusting or Removing the Deskstand

To assemble an MLX telephone, follow the steps below.

! Remove or adjust the deskstand. See Figure 3–30.

■If you want to leave the deskstand in the low position, go to Step 2.

■If you want to adjust the angle of the deskstand, or remove it in order to wall-mount the telephone:

a.Place the telephone face down on a flat surface.

b.Press on the top rear center of the deskstand to release the tab, then pull it up towards you.

c.Insert the tab into the slot in the module cover to adjust the height.

d.To remove the deskstand, continue to pull it up and away from the telephone.

e.Release the deskstand from the front slot.