Lucent Technologies 555-661-140 manual Merlin Legend Communications System Release

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Installing the PC, CAT, or Printer	Page 5-12
Connecting a Printer to the Control Unit

! Plug one end of a D8W cord into the WALL jack on the Z3A4 ADU.

! Plug the other end of the D8W cord into a modular jack on the D8AM modular crossover cable.

! Plug the other end of the D8AM modular crossover cable into the top jack on the 400B2 power adapter.

! Plug the 400B2 power adapter into the wall jack for the control unit. Make sure the building wiring is set up so that the wall jack for the control unit can communicate with the wall jack for the printer.

! Plug one end of a D6AP cord into the 2012D-50M transformer.

If you are using a 248B adapter and 2012D transformer instead of a 2012D-50M transformer, plug the D6AP cord into the jack on the 248B adapter and then connect the spade-tip wires on the 248B adapter to the screws on a 2012D transformer.