Lucent Technologies 555-661-140 manual Merlin Identifier, Modems

MERLIN LEGEND Communications System Release 6.1	Issue 1
Installation 555-661-140	August 1998
Installing Telephones and Adjuncts	Page 3-34
Installing Adjuncts

MERLIN Identifier

MERLIN Identifier allows the use of local telephone company caller identification services to receive, store, and use calling party number information. Before installation, verify that this service provided by the central office is available on the lines to be connected. Each MERLIN Identifier consists of the following:

■A control unit, which must be located near the MERLIN LEGEND control unit

■Up to four individual display units, which can be mounted on analog multiline telephones or wall-mounted for both analog and MLX telephones

■An administrative keyboard

Optional equipment includes an administrative display, a PC, and a serial printer.

For detailed instructions, see MERLIN Identifier Installation and

Administration.

When MERLIN Identifier is used with MLX telephones, a pair of installer-wired 104A termination outlets is required for each MLX set that is connected to a MERLIN Identifier display unit.

Modems

You can connect a modem to one of the following:

■Single-line telephone

■MLX telephone with an MFM

■GPA and analog multiline telephone

NOTE:

When a modem is connected to the TEL/OTHER jack on the MLX telephone equipped with an MFM, data calls can be made from the