Lucent Technologies 9077 04S Maint 6 display combus statistics, Filtering commands maint 50-58

Monitoring and Management Tools

SP Switch Router Adapter card maint commands

[RX] Switch Transmit Connection Rejects:		0
[RX] Switch Receive Encoding Errors:		0
[RX] Switch	Receive Running Disparity Errors: 0
[RX] Switch	Receive Receiver Errors:	0

[RX] Switch Receive Running Checksum Errors: 0

[RX] dont-free packets: 0

[RX] fifo-full packets: 0

maint 6 - display combus statistics

To look at information about the exchanges between the system software and the SP Switch Router Adapter card, enter maint 6 for the receive side and maint 106 for the transmit side.

GR 07> maint 6
[RX] Combus Status:
[RX]	Last interrupt status:		0x50502055
[RX] Combus Statistics:
[RX]	Message ready interrupts:		16153
[RX]	Truncated input messages:		0
[RX]	Grit messages for TX-CPU:		155
[RX]	Ip messages Rcvd (non-bypass):		0
[RX]	Raw messages:		0
[RX]	ISO messages:		0
[RX]	Grid messages:		15998
[RX]	Grid echo requests:		15865
[RX]	Port available messages:		0
[RX]	Segmented Packets:		0
[RX]	Segments Sent:		0
[RX] Combus Errors:
[RX]	Bus in timeouts:	0	Bus out timeouts:	0
[RX]	Out of buffer cond.:	0	Bad packet type:	0
[RX]	Dropped IP packets:	0	Bad packet dest:	0
[RX]	Receive Msg Errors:	0	Receive Format Errors:	0
[RX]	Receive Past End:	0	Received Long Message:	0

Filtering commands - maint 50-58, 150-58

Odd-numbered commands 51–55 return information based on filter ID. Even-numbered commands 50–54 return information based on interface number. These are parameters added to some filter commands:

–detail_level is an optional parameter that specifies how much information is returned, useful levels are 0 and 1.

–IF is an optional parameter that specifies the interface number.

– ID is an optional parameter that specifies the filter ID randomly assigned by filterd .

[RX] 50: Filtering filter list: [detail_level [ID]]

[RX] 51: Filtering filter list: [detail_level [IF]]

[RX] 52: Filtering action list: [detail_level [ID]]

[RX] 53: Filtering action list: [detail_level [IF]]

[RX] 54: Filtering binding list: [detail_level [ID]]

[RX] 55: Filtering binding list: [detail_level [IF]]

[RX] 56: Display filtering statistics: [IF#]

[RX] 57: Reset filtering statistics: [IF#]

[RX] 58: Show filter protocol statistics

3-18 SP Switch Router Adapter Guide - 1.4 Update 2