Configuring the SP Switch Router Adapter

Verify SP Switch Router Adapter card from router

To reset the card in slot 4 and return debug information, enter:

# grreset -d 4

The hold reset option (-h) has numerous uses, here are three.

To isolate a possible problem, set all cards to hold reset and bring them on-line one at a time.

To determine whether a card is affecting other media cards, put that one in hold reset to verify what is happening.

If certain cards cannot restart while under heavy load from the router switch, you can put all cards in hold reset and then bring up those cards having trouble first while the switch load is light.

These commands hold either all or one media card in reset:

#grreset all -h

#grreset slot -h

Refer to the command section in the GRF Reference Guide for a description of grreset.

SP Switch Router Adapter Guide - 1.4 Update 2

2-39

Page 73
Image 73
Lucent Technologies 9077 04S, 9077 16S, 9076 manual # grreset all -h # grreset slot -h