Lucent Technologies 9077 04S, 9077 16S, 9076 manual Save all changes and reboot

Configuring the SP Switch Router Adapter

Installing the PCMCIA spinning disk

hold=4

size=1

remove=y

local=y logfile=/var/portcards/grdump.*

#################################################################

#cleanup our own log file, if necessary.

#################################################################

DEFAULTS hold=2 local=y size=10000 logfile=/var/log/grclean.log

The /etc/grclean.logs.conf file is used to set size limits on log files. Here are some sample entries:

*****************************************************************

*Log files that used to be archived by the */etc/{dailyweeklymonthly} scripts.

*****************************************************************

size=150000

logfile=/var/log/gr.console

size=11000

logfile=/var/log/gr.boot

7Save all changes and reboot:

#grwrite -v

#reboot -i

8Verify that the PCMCIA interface and device are up:

#csconfig -a

Slot 0: flags=0x3<UP,RUNNING>

Attached device: wdc2

Manufacturer Name: "Kingston Technology"

Product Name: "DataPak 520"

Function ID: 4 (PC card ATA)

Assigned IRQ: 11

Assigned I/O port1: 0x3d0-0x3df

Slot 1: flags=0x5<UP,EMPTY>

9To run a quick test, execute the grconslog command. If the command runs, these steps have been performed correctly:

# grconslog

SP Switch Router Adapter Guide - 1.4 Update 2 2-9