Log Messages

Message descriptions

“Expect NODE_INIT but received Stat/Err Request”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/tbsi_svc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when a Read Status service message is received while the SP Switch Router Adapter card is expecting a NODE_INIT message.

“Expired IP buffer received: %d”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/tbsi_rx.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: WARNING

DESCRIPTION: This message is logged when the RX CPU receives an IP header from the receive HW logic for which the buffer has been returned to the pool. This is an indication of errors in the receiving logic (software and/or hardware). If the problem persists, please contact Customer Support.

“Hot interrupt detected, ier1=0x%8x, ier2=0x8x”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/tbsi_svc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: FATAL

DESCRIPTION: This message is logged when a TBIC hot-interrupt condition has been detected.

“Hot interrupt detected, ier1=0x%8x, ier2=0x8x”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_svc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: FATAL

DESCRIPTION: This message is logged when a TBIC hot-interrupt condition has been detected.

“Initializing Main Task...”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/main.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when the RX-CPU enters its main control (while) loop.

SP Switch Router Adapter Guide - 1.4 Update 2

B-7

Page 121
Image 121
Lucent Technologies 9077 04S, 9077 16S, 9076 Expect Nodeinit but received Stat/Err Request, Expired IP buffer received %d