Lucent Technologies 9077 16S, 9077 04S, 9076 manual file entries should now look like the following

Configuring the SP Switch Router Adapter

Installing the PCMCIA spinning disk

#Blank lines and lines beginning with `#' are comments.

/dev/rd0a	/	ufs	rw	0	0
/dev/wd2a	/var/log	ufs	rw	0	2	#PCMCIA slot A, use wd3a for B

4Edit the file /etc/syslog.conf to specify the location where the logs will be kept. Uncomment the local log configuration lines in the “Log messages to Disk” section by removing #disk# from each line and specify /var/log as the directory for each log:

These are the first four lines in the section:

#disk#*.err;*.notice;kern.debug;lpr,auth.info;mail.crit

/var/log/messages
#disk# cron.info	/var/log/cron
#disk# local0.info	/var/log/gritd.packets
#disk# local1.info	/var/log/gr.console

The file entries should now look like the following:

*.err;*.notice;kern.debug;lpr,auth.info;mail.crit

/var/log/messages
cron.info	/var/log/cron
local0.info	/var/log/gritd.packets
local1.info	/var/log/gr.console
local2.*	/var/log/gr.boot
local3.*	/var/log/grinchd.log
local4.*	/var/log/gr.conferrs
local5.*	/var/log/mib2d.log

If you had previously configured your SP Switch Router to log messages to a directory other than /var/log, you changed settings in /etc/grclean.conf and /etc/grclean.logs.conf files.

Go back into those files now and change the log directory.

5To install your changes, restart syslog:

Determine the PID (process ID) for the syslog daemon and then use the kill -HUPPID command to restart it:

#ps -ax grep syslogd

#kill -HUP PID

6Modify /etc/grclean.conf and /etc/grclean.logs.conf to reflect the new log directory.

The /etc/grclean.conf file specifies which log and dump files the grclean program compresses, archives, and deletes.

The /etc/grclean.conf file entries should look like the following:

#################################################################

#port card dump files.

#################################################################

2-8 SP Switch Router Adapter Guide - 1.4 Update 2