Lucent Technologies 9077 16S, 9077 04S, 9076 manual Put Snmp changes into effect, ALL GET SET Trap

Configuring the SP Switch Router Adapter

Step 1. Check SNMP in the SP Switch Router system

#	ip-kind ::=	<hostid>
#		<hostid> <portid>
#		<portid>
#
#	hostid ::=	<hostname> <ip>
#		where: hostname is defined in /etc/host
#	portid ::=	[PORT : ] <#>
#
#	full-ip ::=	<ip>:<#>
#	ip ::=	<#>.<#>.<#>.<#>
#	traplist ::=	trap [, trap]*
#	trap ::=	<trap_name>
#
#	op ::=	ALL GET SET TRAP
#	encrypt ::=	NO <name>
#

#rfc1449addr ::= tcp_ip_addr osi_addr

#tcp_ip_addr ::= <ip>/<#>

#osi_addr ::= <nsap>/<tsel>

#nsap ::= hexes

#tsel ::= hexes

#hexes = hexbyte[: hexbyte]*

#
#
ALLOW	SUBAGENT 1.3.6.1.4.1.1080.1.1.1
	WITH OTHER PASSWORD
	USE 15 SECOND TIMEOUT
COMMUNITY	public
	ALLOW GET, TRAP OPERATIONS
	USE NO ENCRYPTION
MANAGER	129.40.61.12
	SEND ALL TRAPS
	TO PORT 162
	WITH COMMUNITY spenmgmt
MANAGER	129.40.61.5
	SEND ALL TRAPS
	TO PORT 162
	WITH COMMUNITY spenmgmt
COMMUNITY	spenmgmt
	ALLOW ALL OPERATIONS
	USE NO ENCRYPTION
#

Put SNMP changes into effect

To have changes to /etc/snmpd.conf take effect, kill snmpd. It is automatically restarted.

On the SP Switch Router, log in as super user, find the snmpd PID (process ID), and then kill the SNMP daemon, as follows:

% ps -ax grep snmpd

26053 p2 S+	0:00.05 grep snmpd
127 co- S	1:59.55 snmpd /etc/snmpd.conf /var/run/snmpd.OCT

% kill 127

2-20 SP Switch Router Adapter Guide - 1.4 Update 2