Lucent Technologies 9076, 9077 16S manual Grms, Grreset, Grrmb, Grroute, Grrt, Grsite, Grsnapshot

Monitoring and Management Tools

SP Switch Router command overview

grms

This command enables non-privileged users to reboot, halt, or shutdown the SP Switch Router in an orderly manner that precludes damage to the system.

grreset

This command resets one or more specified media cards. Options can direct that memory be dumped when the media card comes back up (grreset -D) or that the media card be held in reset (grreset -h).

grrmb

This command enables you to use the maint command set to display media card statistics. maint commands require the GR ##> screen prompt which is invoked by executing the grrmb command.When grrmb is entered, the screen prompt changes to:

#grrmb GR ##>

where ## is the number of a chassis slot. The default is 66, specifying that the command will act on slot 66, the router control board. The port command changes the prompt slot number. Using grrmb and the maint commands is described in the section “SP Switch Router Adapter card maint commands” on page 3-15.

grroute

This command adds the routes specified in the /etc/grroute.conf configuration file. This file maintains the set of static routes to remote nodes. If you are running GateD, do not use grroute, you must use the GateD Static statement to create static routes.

grrt

The grrt -pslot -Scommand displays the route table for an individual media card. Other options delete table entries, display the route to a specified address, and so on.

grsite

This command enables a site to manage and install special files after the main release is loaded into RAM. A special file could be a single binary image for a type of media card to be used for debug or testing, for example, an experimental version of the FDDI run-time file /var/portcards/fddi.run. grsite has options to add, delete, or list files in the current release, the next boot release, or an arbitrary release set.

grsnapshot

This command runs a script that can be specified to copy configuration files (or release images) to a target flash device under a new or the current version name. For example, grsnapshot can

3-4 SP Switch Router Adapter Guide - 1.4 Update 2