Monitoring and Management Tools

SP Switch Router logs

Sample messages log

The messages log is the general operating system log. It contains boot or deadstart commentary, system-level warnings, and error messages.

In the excerpt below, the third line from the top shows the SP Switch Router Adapter card, DEV1, being configured with its interface name, gt020.

This is a sample messages log from the SP Switch Router with host name tester.site.com.

tester-6 more messages

Feb 10 03:30:17 tester grinchd[122]: sendto: No buffer space available

Feb 10 10:49:57 tester kernel: de0: framing error

Feb 10 10:04:52 tester kernel: gt020: creating interface: GigaRouter DEV1, GRIT address 0:7:0

Feb 10 10:04:58 tester kernel: gs0b0:creating interface: GigaRouter HSSI, GRIT address 0:0xb:0

Feb 10 10:04:59 tester kernel: gf080: creating interface: GigaRouter FDDI, GRIT address 0:8:0

Feb 10 10:04:59 tester kernel: gf081: creating interface: GigaRouter FDDI, GRIT address 0:8:1

Feb 10 10:04:59 tester kernel: gf082: creating interface: GigaRouter FDDI, GRIT address 0:8:2

Feb 10 10:04:59 tester kernel: gf083: creating interface: GigaRouter FDDI, GRIT address 0:8:3

Feb 17 15:57:39 tester kernel: uid 26 on /usr: file system full Feb 17 15:57:54 tester last message repeated 2 times

Feb 17 19:47:53 tester Error opening grifconfig file drifconfig.conf. Exiting. Feb 17 20:04:32 tester last message repeated 6 times

Feb 17 21:54:40 tester login: ROOT LOGIN (root) ON ttyp1 FROM mondo

Feb 17 21:55:58 tester LMI type STANDARD is not supported, type NONE is selected Feb 17 21:55:58 tester last message repeated 6 times

Feb 17 22:44:57 tester fr[5898]: Route Circuit configured on an un-defined link

Feb 17 22:44:57

tester fr[5898]:

Slot: 1, Link: 0

Feb 17 22:44:57

tester fr[5898]: Switch Circuit configured on an un-defined link

Feb 17 22:44:57

tester fr[5898]:

Slot: 0, Link: 1

Feb 17 22:50:39

tester fr[6025]: un-supported auto-grif i/f name configured

Feb 17 22:50:39

tester fr[6025]:

I/F name:gO060, Slot=6, Port=0

Feb 17 22:50:40

tester fr[6025]: Route Circuit configured on an un-defined link

Feb 17 22:50:40

tester fr[6025]:

Slot: 6, Link: 0

Feb 18 10:02:59

tester reboot: rebooted by root

Feb 18 10:02:59

tester syslogd: exiting on signal 15

Feb 18 10:04:17

tester kernel: Kernel #0 (nit): Thu Feb 13 08:46:56 CST 1999

Feb 18 10:04:17

tester kernel: cpu = 80486 (about 66 MHz)

Feb 18 10:04:17

tester kernel: delay multiplier 1050

Feb 18

10:04:17

tester kernel: real mem = 37748736

Feb 18

10:04:17

tester kernel: avail mem = 34865152

Feb 18

10:04:17

tester kernel: buffer cache = 3608576

Feb 18

10:04:17

tester kernel: isa0 (root)

tester-7

Figure 3-4. Sample entries in the messages log

SP Switch Router Adapter Guide - 1.4 Update 2

3-33

Page 109
Image 109
Lucent Technologies 9077 04S, 9077 16S, 9076 manual Sample messages log, Sample entries in the messages log