Lucent Technologies 9076 Switch Route table loaded, %d entries, Tbic Init msg sent to TX-CPU

Log Messages

Message descriptions

“Switch Route table loaded, %d entries.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_svc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when the transient switch route table has been moved to the permanent switch route table resulted from the processing of a Load Routes service message.

“TB4 segment received in error.” "TB4-HDR word%d: 0x%x.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/tbsi_rx.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: WARNING

DESCRIPTION: This message is logged when a TB4 segment was received in error. The TB4 header and the message data are included in the log.

“TB4 segment received in wrong state.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/tbsi_rx.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: WARNING

DESCRIPTION: This message is logged when a TB4 segment is received while the SP Switch Router Adapter card’s state machine is not in RUNNING or QUIESCED state. The TB4 header and the message data are included in the log. This happens when a node sends data packets to the SP Switch Router Adapter card without knowing that the card interface is down.

“TBIC INIT msg sent to TX-CPU.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/tbsi_ipc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when the RX-CPU sends a message to the TX-CPU to initialize the TBIC. The RX-CPU will then wait for a TBIC INITED message from the TX-CPU.

B-14 SP Switch Router Adapter Guide - 1.4 Update 2