Lucent Technologies 9076, 9077 16S, 9077 04S manual RX Setting the RC in operational mode, stat=0x%x

Log Messages

Message descriptions

“RX: Setting the RC in operational mode, stat=0x%x.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/tbsi_rc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when the RX Side of the SP Switch Router

Adapter card is ready to receive data messages from the switch.

“Timed out resolving ARP. If: %d IP: %d.%d.%d.%d.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_arp.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: WARNING

DESCRIPTION: This message is logged whenever the TX-CPU fails to resolve an IP address. This message indicates that either the node with the IP address does not receive nor send the ARP request/reponse or the node is down.

“TX-CPU: Access FIFO busy, discarding IP packet.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_arp.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: WARNING

DESCRIPTION: This message is logged whenever the TX-CPU discards an IP packet due to the link (TBIC) congestion. This log message indicates that, potentially, the switch is congested.

“TX-CPU Config Params msg received from RX-CPU.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_ipc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when the TX-CPU receives the board’s configuration parameters from the RX-CPU.

“TX-CPU sending msg type=%d to RX-CPU.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_ipc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged whenever the TX-CPU sends a message to the RX-CPU via the IPC channel.

SP Switch Router Adapter Guide - 1.4 Update 2 B-17