
Monitoring and Management Tools
SP Switch Router Adapter card maint commands
[RX]
[RX] SP HATS UDP port set to: 10000
Use maint 89 8 to view the current port number setting and number of messages discarded:
GR 13> maint 89 8
[RX] SP HATS UDP port number: 10000
[RX] SP HATS (RMS) discards: 654
To disable UDP discards, set the port number to an unused number (the range is 0 to 65535):
GR 13> maint 89 7 65533
[RX] SP HATS UDP port set to: 65533
If you enter an
GR 13> maint 89 7 101010
[RX] Illegal port number (0 << port# << 65535
Display ARP table - maint 189 1
The maint 189 1 command returns the current ARP entries. IP= is the address for the node,
GR 0> maint 189 1 [TX]
[TX] ARP Entry: IP= 192.168.178.202,
[TX] ARP Entry: IP= 192.168.178.203,
[TX] ARP Entry: IP= 192.168.178.204,
[TX] ARP Entry: IP= 192.168.178.205,
[TX] ARP Entry: IP= 192.168.178.206,
[TX] ARP Entry: IP= 192.168.178.207,
[TX] ARP Entry: IP= 192.168.178.208,
Note:
The
Flush the ARP cache - maint 189 10
This command removes all ARP entries:
GR 0> maint 189 10 [TX]
[TX] Flush ARP Entry: IP= 192.168.178.202,
[TX] Flush ARP Entry: IP= 192.168.178.203,
[TX] Flush ARP Entry: IP= 192.168.178.204,
[TX] Flush ARP Entry: IP= 192.168.178.205,
[TX] Flush ARP Entry: IP= 192.168.178.206,
[TX] Flush ARP Entry: IP= 192.168.178.207,
[TX] Flush ARP Entry: IP= 192.168.178.208,
[TX] Flush ARP cache complete
SP Switch Router Adapter Guide - 1.4 Update 2 |