Lucent Technologies 9077 16S, 9077 04S, 9076 manual SP Switch Router example, Grdinfo -all

Monitoring and Management Tools

Data collection utility - grdinfo

–grdinfo -frame

the collection of system-wide Frame Relay status, configurations, and statistics

–grdinfo -bridge

the collection of system-wide bridging status, configurations, and statistics

–grdinfo -dr

The dynamic routing option is not available in this release.

–grdinfo -all

collects and combines all the data the other options collect (not recommended)

Caution: The grdinfo all command can fill up the file system. It will hang, and you must use Control-C to end the process. Clean up any files that were saved before the abort.

grdinfo collects and compresses the requested information into a tar.gz file in the /var/tmp/grdinfo directory:

grdinfo.tar.gz

SP Switch Router example

This example collects card statistics for the SP Switch Router Adapter card in slot 11:

# grdinfo -card=11

Output from /usr/nbin/grdinfo is going to file /var/tmp/grdinfo/grdinfo.tar.gz

#cd /var/tmp/grdinfo/

#ls

grdinfo.tar.gz

#gunzip grdinfo.tar.gz

#ls

grdinfo.tar

#tar xvf grdinfo.tar /var/tmp/grdinfo/grdinfo.145041.info

/var/tmp/grdinfo/grdinfo.145041.errors tar: tar vol 1, 2 files, 10240 bytes read.

#vi /var/tmp/grdinfo/grdinfo.145041.info

Here are the contents of the file saved for the SP Switch Router Adapter card:

============================================================

This file contains data collected by grdinfo while running.

============================================================

Not collecting configuration files

Not collecting log files

Not collecting media and kernel dump files

Not collecting system information

Not collecting frame relay information

Not collecting transparent bridging information

Getting maint information from cards : args -> 11

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

Card 11 / DEV1.

3-26 SP Switch Router Adapter Guide - 1.4 Update 2