Lucent Technologies 9076, 9077 16S, 9077 04S manual Initializing RX Subsystem data structure

Log Messages

Message descriptions

“Initializing RX Subsystem data structure.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/tbsi_rx.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when the RX Side is ready to initialize its subsystem to bring the up the interface.

“IOSTB3:RX SET TOD service message received.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/tbsi_svc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged every time a SET TOD service message is received. Historically, this type of message was used to aid debugging between the switch manager and the card.

“Loopback routes found for IP adr: 0x%x, sw-node.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_arp.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY:INFO

DESCRIPTION: This message is logged when the TX CPU has failed to find a switch node address for an IP address. Not resolving the switch node address is normal for a node(s) which once existed on the network but has since been fenced.

“Lost of STI clock, TBIC Status = 0x%x.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/tbsi_svc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: ERROR

DESCRIPTION: This message is logged when the TBIC’s STI clock (status bit) becomes invalid. Status is the TBIC’s status register.

“Lost of STI clock, TBIC Status = 0x%x.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_svc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: ERROR

DESCRIPTION: Logged when the TBIC’s STI clock (status bit) becomes invalid.

B-8 SP Switch Router Adapter Guide - 1.4 Update 2