Log Messages

Message descriptions

“TX-CPU TBIC Init msg received from RX-CPU.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_ipc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when the TX-CPU receives a TBIC Init message from the TX-CPU. The TX-CPU initializes the Transmit TBIC getting it ready for transmitting data.

“TX: Port is connected, stat=0x%x.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_tc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when the Transmit TBIC’s Send port is connected with the switch chip receive port.

“TX-PROR: start_node: %d, end_node: %d, # entries: %d.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_svc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when a Processor Routes service message is processed.

“TX: pseudo STI clock is valid.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_tc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when the Transmit TBIC STI clock becomes valid. The term “pseudo” is used to remind (us) that the STI is not from the interface, but from the Receive TBIC.

“TX: Setting the TC in operational mode, stat= 0x%x.” “TX clearing interrupts, i0=0x%x, i1=0x%x.”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_tc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when the TX-CPU is ready to go to operational state. That is, the card will be able to send data to the TBIC.

B-18

SP Switch Router Adapter Guide - 1.4 Update 2

Page 132
Image 132
Lucent Technologies 9077 16S, 9077 04S, 9076 TX-CPU Tbic Init msg received from RX-CPU, TX Port is connected, stat=0x%x