Philips HTS5500C/37B user manual Troubleshooting, Problem, Solution, E n g l i s h

Models: HTS5500C

1 53
Download 53 pages 33.57 Kb
Page 48
Image 48
Troubleshooting

E n g l i s h

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

Solution

 

 

No power.

No picture.

Completely distorted picture or black/white picture.

The aspect ratio of the screen cannot be changed even though you have set the TV display.

No sound or distorted sound.

Cannot activate some features such as Angles, Subtitles, or multi-language Audio.

Check if the AC power cord is properly connected.

Press the STANDBY ON on the front of the DVD system to turn on the power.

Refer to your TV user manual for correct Video In channel selection. Change the TV channel until you see the DVD screen.

Press DISC on the remote control.

If the progressive scan feature is activated but the connected TV

does not support progressive signals or the cables are not connected accordingly, see page 20 for proper progressive scan set up or deactivate the progressive scan feature as below:

1)Turn off your TV progressive scan mode or turn on to interlaced mode.

2)Press OPEN CLOSE to open the disc tray.

3)Press 1 on the remote control.

4)Press MUTE on the remote control.

If this happens when you are changing the setting of the ‘TV TYPE’, wait for 15 seconds for the auto recovery.

If this happens when you are turning on the progressive scan feature, wait for 15 seconds for the auto recovery.

Check the video connection.

Sometimes a small amount of picture distortion may appear. This is not a malfunction.

Clean the disc.

The aspect ratio is fixed on the DVD disc.

Depending on the TV, it may not be possible to change the aspect ratio.

Adjust the volume.

Check the speaker connections and settings.

Make sure that the audio cables are connected and press the SOURCE button to select the correct input source (TV or AUX/ DI, for example) to choose the equipment that you want to hear through the DVD system.

The features may not be available on the DVD.

Changing the language for the sound or subtitle is prohibited on this DVD.

Need Help? Visit us at www.usasupport.philips.com

48

001-053-hts5500-37-Eng47

48

13/04/05,31394:15 PM115 14781

Page 48
Image 48
Philips HTS5500C/37B user manual Troubleshooting, Problem, Solution, E n g l i s h