Philips HTS5500C/37B user manual Getting Started, Setting the TV

Getting Started

Step 1: Inserting batteries into the remote control

3

1

2

1Open the battery compartment.

2Insert two batteries type R06 or AA, following the indications (+-) inside the compartment.

3Close the cover.

CAUTION!

–Remove batteries if they are exhausted or if the remote control is not to be used for a long time.

–Do not use old and new, or different types of batteries in combination.

–Batteries contain hazardous chemical substances, so they should be disposed of properly.

Using the remote control to operate the system

1Aim the remote control directly at the remote sensor (iR) on the front panel.

2Select the source you wish to control by pressing one of the source select buttons on the remote control (for example TV, TUNER.)

3Then select the desired function (for example É, S, T.)

Step 2: Setting the TV

IMPORTANT!

Make sure you have completed all the necessary connections. (See page 11-12 “Connecting to TV”)

1Press SOURCE control until “DVD/CD” appears on the display panel.

2Turn on the TV and set it to the correct video-in channel. You should see the blue DVD background screen on the TV.

➜Or, the TV remote control may have a button or switch that chooses between different video modes.

➜Or, set the TV to channel 3 or 4 if you are using an RF modulator.

E n g l i s h

19

001-053-hts5500-37-Eng47	19	13/04/05, 4:13 PM
		3139 115 14781