Installing the Display Vertically
You can install the PDP Monitor vertically. In this case, the fan automatically works. If you wish to stop the fan, position the PDP Monitor horizontally and then set “Fan” to “Off” in the “Function” menu.
Please use the wall attachment panel exclusively when installing vertically. And you have to put left side of the PDP Monitor on top when viewed from front.
Before Using the Video Wall and the Multiple Display Control function
Example for 2x2 Video Wall function
1Please create ID for each PDP Monitor before installing them close together. It may be difficult to
create IDs when operating the remote control for PDPs that are installed close to each other.
2For details about Video Wall configuration and
operation, refer to “Setting the Multiple Screen” on page 33.
Example for 2x2 Video Wall connections
Rear of the PDP Monitor | Rear of the PDP Monitor |
②
①
➢ ◆ You can connect a Composite (Video) without | Example for Multiple Display Control connections |
a distributor as you would connect a PC. |
|
◆ Select ID input on the menu. Use the numeric |
|
buttons to enter the ID for PDP Monitor |
|
adjustment. You can operate the remote |
|
control only for the PDP Monitor that has been |
|
selected. |
|
◆For details about Multiple Display Control, refer
to “Setting the MDC (Multiple Display Control)” on page 29 and the Help section in MDC program CD.
English - 12