![](/images/new-backgrounds/1185343/18534355x1.webp)
Setting the MDC (Multiple Display Control)
Function
Screen Burn Protection
Safety Lock
Multi Control
Video Wall
Fan: Off
Move |
| Enter | Return |
| Multi Control |
| |
ID Setup | : | 00 |
|
ID Input | : |
|
Move |
| Enter | Return |
| Multi Control |
| |
ID Setup | : | 00 |
|
ID Input | : |
|
Move |
| Enter | Return |
| Multi Control |
| |
ID Setup | : | 00 |
|
ID Input | : |
|
0 .. 9: Enter ID Input Number
This function enables you to easily control the connected PDP Displays on the PC by specifying IDs to connected PDP Displays.
1Press the MENU ( ) button.
Result: The main menu is displayed.
2Press the ▲ or ▼ button to select Function.
Result: The Function menu is displayed.
3Press the ENTER ( ) button.
4Press the ▲ or ▼ button to select Multi Control.
5Press the ENTER ( ) button.
Result: The Multi Control menu is displayed with the ID Setup selected.
6Press the ENTER ( ) button again.
Select the ID setup number by using the numeric buttons. Press the ENTER ( ) button.
7Press the ▲ or ▼ button to select ID Input. Press the ENTER ( ) button.
8Enter ID input number by using the numeric buttons.
9Press the EXIT button to exit.
➢To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode. When entering the ID Input number of PDP1 while the PDP Display is set in the ID Input mode, only PDP1 is switched to the Menu screen and you can operate the remote control. At this time, PDP2 doesn't operate with the remote control and displays the standby mode of ID Input.
➢For further details, refer to the MDC program guide.
➢You can select these options by simply pressing the MDC (Multiple Display Control) button on the remote control.
➢Refer to the following Web site for information about MDC programs and protocol documents: http://www.samsung.com/support/productsupport/downloa d/index.aspx
English - 28