English - 33
e
Displaying the Setting Information
You can view the setting status you select by pressing the “INFO”
button on the remote control.
Setting and Displaying the Current Time
You can set the PDP Display’s clock so that the current time is
displayed by pressing the “INFO” button. You must also set the
time if you wish to use the automatic on or off timers.
1Press the MENU () button.
Result:The main menu is displayed.
2Press the …or †button to select Setup.
Result:The Setup menu is displayed.
3Press the ENTER () button.
4Press the …or †button to select Time.
Press the ENTER () button.
Result:The Clock Set is selected.
5Press the ENTER () button again.
6Press the œor √button to select Hour or Minute.
Set these by pressing the …or †button.
➢You can set the hour and minute directly by pressing
the numeric buttons on the remote control.
7Press the ENTER () button.
8Press the EXIT button to exit.
➢
In the event of a power interruption or the set being turned off at
the supply, the settings for the Clock will be lost.
AV
Picture : Dynamic
Sound : Custom
SRS TS XT : Off
--
:
--
Time
Language : English
PC
Setup
Move Enter Return
Clock Set 12: 00
On Timer 12: 00 Off
Off Timer 12: 00 Off
Time
Move Enter Return
Clock Set
Move Adjust Return
Hour
12 00
Minute
BN68-01304D-00Eng 7/30/07 12:43 PM Page 33