English - 34
Switching the PDP Display On and Off Automatically
You can set the on or off timers so that the PDP Display will:
◆Switch on automatically and tune source of your choice
at the time you select.
◆Switch off automatically at the time you select.
➢The first step is to set the PDP Display’s clock (refer to
“Setting and Displaying the Current Time” on page 33).
1Press the MENU () button.
Result:The main menu is displayed.
2Press the …or †button to select Setup.
Result:The Setup menu is displayed.
3Press the ENTER () button.
4Press the …or †button to select Time.
Press the ENTER () button.
Result:The Time menu is displayed.
5Press the …or †button to select On Timer.
Press the ENTER () button.
Result:The On Timer menu is displayed.
6Select Hour, Minute, Source (AV, S-Video , Component, PC1, PC2, or
DVI), or Volume by pressing the œor √button.
Set these by pressing the …or †button.
➢You can set the hour and minute directly by pressing
the numeric buttons on the remote control.
7Press the œor √button to select Activation.
8To activate On Timer with the setting entered, select Yesby
pressing the …or †button.
9Press the ENTER () button.
Result:The Time menu is displayed again.
Continued...
Time
Language : English
PC
Setup
Move Enter Return
Clock Set 12: 00
On Timer 12: 00 Off
Off Timer 12: 00 Off
Time
Move Enter Return
On Timer
Move Adjust Return
Hour
12 00
Minute
Source
Component
10
Volume
No
Activation
On Timer
Move Adjust Return
Hour
12 00
Minute
Source
Component
10
Volume
Yes
Activation
BN68-01304D-00Eng 7/30/07 12:43 PM Page 34