Selecting the Fan | Samsung PPM42M7HSX/EDC, PPM50M7HSX/EDC instruction

Selecting the Fan

	Function
Screen Burn Protection
Safety Lock
Multi Control
Video Wall
Fan	: Off
Move	Enter	Return

Function

Screen Burn Protection

Safety Lock

Multi Control

Video Wall

Fan: Off Off

On

Move

Enter

Return

Fans inside the PDP Display are used to lower the temperature of the tops and the front of the PDP Display. To reduce the noise of the fan, you may stop the fan by setting the Fan to “Off”.

The temperature of the top and the front of the PDP Display may increase when you watch the PDP Display for a long period of time while the fan is stopped, but the PDP Display will operate normally.

1Press the MENU ( ) button.

Result: The main menu is displayed.

2Press the ▲ or ▼ button to select Function.

Result: The Function menu is displayed.

3Press the ENTER ( ) button.

4Press the ▲ or ▼ button to select Fan. Press the ENTER ( ) button.

5Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button.

6Press the EXIT button to exit.

➢◆ If your PDP Display is displayed vertically, the fan automatically works.

◆The message Check Fan is displayed if there is a fan problem.

◆Please use the fan when the temperature is over 35 degrees.

English - 36

Image 36

Samsung PPM42M7HSX/EDC, PPM50M7HSX/EDC manual Selecting the Fan

Contents

Professional PDP Display User Instructions Screen Image retention Checking Parts Owner’s Instructions Contents Symbols Control Panel Front of the PDP Display Audio is an audio input jack for PC1 and PC2 modes For further details about connections, refer to Infrared Remote Control Inserting the Batteries in the Remote Control Assembling the Stand-Base Installing the Display on the Wall Attachment Panel Installation Notes Stay in place after installation Insert the screw into the plastic hangerSee the figure below Left and right plastic hangers Please create ID for each PDP Display before You can connect a Composite Video without Hang the two T shaped hangers On the square holes on the rear Ferrite Cores Switching Your PDP Display On and Off Choosing Your LanguagePress the Menu button Result The main menu is displayed Press the Enter button Changing the Picture Standard Customizing the Picture Settings Adjusting the RGB Color PC Mode Setting the Picture PC ModePreset to the PC mode by pressing the Source button Image Lock Using Zoom function PC Mode Result The PC menu is displayed Positioning and Sizing the screen using Zoom Selecting the Picture Size Freezing the Current Picture Changing the Sound StandardPress the Enter button Press the Exit button to exit Customizing the Sound Settings Setting the TruSurround XT Activating Panel Button Lock Activating Remote Control Button Lock Setting Up Your Personal ID Number Setting the MDC Multiple Display Control Preventing Screen Burn-in Min Reducing the Effects of Screen Burn Setting the Screen Burn Protection Timer Setting the Multiple Screen You can get various display effects with many PDPs Displaying the Setting Information Setting and Displaying the Current Time Switching the PDP Display On and Off Automatically Auto Power Off Selecting the Fan Easy functions of the remote control Viewing the Picture in Picture PIP Viewing an External Signal Source Connecting to the Audio/Video Input Rear of the PDP Display Connecting to the S-Video Input Connecting to the Component Input Connecting to the DVD/DTV Receiver Input Connecting to the DVI Input Connecting to the PC Input Setting up Your PC Software Windows only Input Mode PC/DVI Power Saver PC1 mode only Check the picture contrast and brightness settings Check the volumeNormal picture but no sound Check the volume Check the battery terminals Technical Specifications Component in L/R RCA, 2P This page is intentionally Left blank Correct Disposal of This Product