Installing the Display on the Wall Attachment Panel
ENG
☛This wall mount bracket installation guide is for the following models: WMN4230/WMN5030/WMN6330. This installation guide may be different from the PDP User’s manual. Please refer to the proper installation guide for your product.
Installation Notes
◆Do not install the PDP on any place other than vertical walls.
◆To protect the performance of the PDP and prevent troubles, avoid the followings:
-Do not install next to smoke and fire detectors.
-Do not install in an area subjected to vibration or high voltage.
-Do not install near or around any heating apparatus.
◆Use only recommended parts and components.
Mounting Kits
Wall Mount Bracket | Plastic Hanger | Screws |
|
PPM42S3Q/PPM50H3Q: 4
PPM63H3Q: 6
PPM42S3Q/PPM50H3QPPM63H3Q
How to Adjust Mounting Angle
(depending on your model)
The wall mount bracket is delivered separately. Please tighten the captive screw in the direction of the arrow after assembling the bracket.
1Secure the PDP to the wall mount bracket. (Please refer to the following instructions.)
2Set the angle by pulling the upper end of the PDP attached to bracket in the direction of the arrow.
3The angle can be adjusted from 0° to 20° by ±2°.
10