Your PDP Monitor has several setting options that allow you to
control the picture quality.
1Press the MENU()button.
Result:The main menu is displayed.
2Press the …or †button to select Picture.
Result:
The
Picture menu is displayed.
3Press the ENTER () button.
Result:
The
Mode is selected.
4Press the …or †button to select Custom.
Press the ENTER () button.
5Select the required option by pressing the …or †button.
Result:The following options are available.
◆Contrast - Brightness - Sharpness - Color -
Tint (NTSC only)
◆Contrast - Brightness : PC or DVI Mode.
6Press the ENTER () button.
Result:The horizontal bar is displayed.
Press the œor √button until you reach the optimal
setting.
➢◆Press the …or †button to select other option(s).
◆When the picture mode is set to Custom, the settings
values may vary depending on the input source.
(ex. AV, Component, PC, or DVI.)
7Press the ENTER () button.
8Press the MENU() button to return to the Picturemenu.
Press the …or †button to select Color Tone.
Press the ENTER () button.
9Select the required option by pressing the …or †button.
Result:The following
options
are available.
◆Cool2 - Cool1 - Normal - Warm1 - Warm2
◆Custom - Cool - Normal - Warm : PC Mode.
◆Cool - Normal - Warm : DVI Mode.
10 Press the ENTER () button.
Customizing the Picture Settings
English - 17
Contrast 100
Mode :Dynamic √√
Custom √√
Color Tone : Normal √√
Color Control √√
Film Mode : Off √√
Size : 16:9 √√
PIP √√
Picture
Move Enter Return
TV
Mode :Dynamic √√
Custom √√
Color Tone : Normal √√
Color Control √√
Film Mode : Off √√
Size : 16:9 √√
PIP √√
Picture
Move Enter Return
TV
Mode :Dynamic
Custom
Color Tone : Normal
Color Control
Film Mode : Off
Size : 16:9
PIP
Picture
Move Enter Return
TV
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Custom
Move Enter Return
TV
Cool2
Cool1
Normal
Warm1
Warm2
BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 17